Description
Product overview
DBK5 ultrasonic sonar sensor is a non‑contact echo‑time‑of‑flight ultrasonic level measuring sensor. It transmits ultrasonic pulses and calculates liquid / solid material level height according to echo return time. It is immune to liquid color, transparency, steam and slight foam interference. Built‑in temperature compensation, short‑circuit and reverse‑polarity protection. Equipped with multi‑color LED status indicator. Cylindrical metal threaded housing for convenient field installation. Widely applied for water tank, sewage pool, chemical tank, silo, material bin level monitoring in water‑treatment, chemical, food‑processing and automation industries.
‑ Non‑contact ultrasonic echo ranging principle for liquid & solid level measurement
‑ Integrated temperature compensation, effectively reduce ambient temperature drift error
‑ Multiple output options: NPN / PNP switch, 4‑20 mA analog, RS485 Modbus‑RTU
‑ Measuring range: 0.25‑6 m; blind zone: 250 mm
‑ Resolution: 1 mm; measuring accuracy: ±1% FS
‑ Multi‑color LED indicator for power, echo signal and alarm status
‑ Nickel‑plated brass M30 threaded housing, IP67 protection grade
‑ Anti‑foam partial adaptability, not affected by target color
‑ Response time adjustable, filter function for unstable echo suppression
‑ Reverse‑polarity & short‑circuit protection, stable for harsh industrial environment
‑ CE certified, suitable for tank and silo continuous level monitoring
| Model | BH-dbk+5-3E1/M18-WX |
| Detection range | Paper, washi paper, alloy laminates and films up to 0.4mm thick, self-adhesive films, metal sheets up to 0.3mm thick, fine corrugated boards, wafers and PCBs with a weight per unit area of 20-2000g/m2. |
| Design | Cylindrical M18 |
| Working Mode | Double Sheet Controller |
| Characteristics | Distance between transmitter and receiver selectable |
| Ultrasonic sensor characteristics | |
| Measurement Methods | Pulse operation with amplitude estimation |
| Transducer frequency | 400 kHz |
| Blind Zone | 7 mm in front of the transmitter and receiver |
| Electrical data | |
| Operating Voltage | 20 - 30 V d.c., reverse polarity protected |
| Voltage pulsation | ± 10 % |
| No-load current loss | ≤ 50 mA |
| Connection type | 2 m PUR cable, 7 x 0.25 mm² |
| Transmitter cable | Transmitter cable length 1 m, receiver cable length 2 m |
| output quantity | |
| Output 1 | Dual npn output: Imax = 200 mA (-UB+2V) |
| Normally open/closed, adjustable, short circuit protected | |
| Output 1 | Tabulated npn output: Imax = 200 mA (-UB+2V) |
| Normally open/closed, adjustable, short circuit protected | |
| response time | Trigger mode <500µs, auto mode 2.5ms |
| Power-up delay | < 750 ms |
| importation | |
| Description | < -UB+6 V: logic 1; > -UB+10 V or control input open: l logic 0 |
| Input 1 | Control Inputs |
| Input 2 | Control Inputs |
| Input 3 | Control Inputs |
| housings | |
| Transmitter-Receiver Distance | 20 - 60 mm; optimum: 40 mm ± 3 mm |
| Allowable Angular Deviation | ± 45° to vertical |
| Material | Stainless steel sleeves, plastic parts |
| Ultrasonic transducer | Polyurethane foam, glass filled epoxy resin |
| Maximum nut tightening torque | 15 Nm |
| Protection class EN 60529 | IP 65 |
| Operating temperature | Between +5°C and +60°C |
| Storage temperature | -40°C to +85°C |
| Weight | 130 g |
| new version | Elbow 90° |
| Swap out transmitter/receiver | |
| Separate emitter/receiver | |
| Technical features/characteristics | |
| Control device | Control input |
| Setting range | Detection range set via PC when company ships out (factory setting) |
| Indicator light | 1 x Dual LED; green: working / red: double / blinking red: missing sheets |
| Characteristics | Distance between transmitter and receiver selectable |

Wiring diagram